Creating a DFI from golden bq34z100

Good Morning to All!

I am trying to create a DFI from a bq34z100 and not had much success. bqEVSW has no problems over the EV2300 I2C port.

Going to Production With the bq34z1xx (SLUA665) says to use bqTester Rom Imager to create the DFI. My bqTester Rom Imager reports Communication error reading from gas gauge when I try to autodetect the target device. bq34z100 is not an option on the Choose Target Device screen.

What am I missing?

Thanks!

Phil