Part Number:LM34904
Need to know proper value of pull up resistor that needs to be connected with Pok, to get its level at least 3.3V.
Presently with a pull up resistor of 10 k and VCC 5V, signal goes as high as 1.88V, with 5k, goes upto 2.5V on reducing the pull up resistor to 5k, and 2.6V on reducing value of pull up to 1k.
Is this behaviour of IC acceptable?
As /Pok is an Open drain pin, so what voltage levels can be connected, to pull-up.
Regards,
Puneet