After a lot works hours with the software Bq27x10 Evaluation software version 1.2.0 I have concluded that my problem was a bug in the software.
I have used a Bq2710EVM evaluation module & boards
Ev2300
Windows XP
Bq27x10 Evaluation software version 1.2.0
My target to write a GG file in the flash memory of the Bq27010. (previous I have saved a gg file with the setting that I need)
But always the first time that I load the file (gg file) and push button "write all EEPROM" the last data in the adress 0x7E and 0x7F is always 00.
Only happens the first time. (after run the software). If I don't close the program, I don't have any problem
I hope that somebody help this information