Part Number:LMZ35003
I'm looking at the datasheet for the LMz35003.
The Vout pin descriptions say the following
| VOUT |
| Output voltage. These pins are connected to the internal output inductor. Connect these pins to the output load and connect external bypass capacitors between these pins and PGND. Connect a resistor from these pins to VADJ to set the output voltage. |
If we connect the different Vout and VADJ pins with different Rset values in parallel, can we get different Vout voltage values?
So for example, if we connect Vout pin 10 with a 52.3KΩ to VADJ and Vout pin 11 to a 175KΩ ohm to VADJ,
Can we get both a 5V and 15V output?
My guess is it's not possible. Just thought I'd double check.