I have developed a new board with the bq78350/76920 to 76940.
Now i try to set the parameters so, that the BMS switch the chargingcurrent of, when the battery is full.
I have set the Tapercurrent to 250mA, the Term Voltage to 75mV and the fast charging voltage is set to 4050mV.
At the end of charging the the device stops the charging (CHG-Fet switch of) for about 1500ms and starts charging again for about 250ms.
What can I change, that the charging stops for longer time, or the cellvoltage falls to 4050mV?
For the adjustments I use the BQ78350EVM with a battery 10S1P.
Many thanks and best regards
Karl