Part Number:BQ2057W
Hi, we are looking to use the BQ2057W with a two li polymer batteries, max voltage 7.4 volts, but they both have there own thermistor in each battery.
The problem is that the BQ2057 only has one input for thermistor monitoring and we need to combine these two into this one input.
Do you have any advice on how we can combine the thermistors into the device, or perhaps you may have an alternative device that can accommodate the two thermistors in this way.
We have two separate batteries physically set apart from each other and that's why they have separate thermistors.
Thanks
Ian White