bq27510-g3 Design Capacity at 4,1V

Hi everybody,

I use 9600 mAh pack charged at 4,1V with bq27510-g3. I get a golden image with learning cycle at 4,2V and a second at 4,1V. This worked fine until SOH and TTE dramatically decrease.

According to this post step 6, I made a mistake with SOH Load I, left by default.

My question : for the end product, charging at 4,1V, should I set Design Capacity at 9600 mAh (used for learning cycle at 4,2V) or 8640 mAh (90%) to have SOH = 100% ?

Regards, Pierre