I want to configure the bq40z50 to accept a charge from a dumb charger that doesn't have SMB communication. I've been through all the parameters and can't seem to find the one that will allow me to do this. The battery quits charging ~5s after unplugging the SMB and start charging a few seconds after I plug it back in. What settings will allow me to do this? Here is my current configuration:
| Charging Configuration | 0 |
| Temperature Enable | 0f |
| Temperature Mode | 1 |
| DA Configuration | 1e |
| FET Options | 7c |
| Sbs Gauging Configuration | 7 |
| Sbs Configuration | 20 |
| Power Config | 0 |
| IO Config | 0 |
| LED Configuration | da |
| SOC Flag Config A | 0c8c |
| SOC Flag Config B | cc |
| Balancing Configuration | 5 |
| IT Gauging Configuration | d4de |
Thanks,