Part Number:BQ25713
Hi,
I am using BQ25713EVM-017 board and is successful setup two cell boost to 5.0V or 9.0V but not with one cell.
My setup:
- Remove JP 2,3,4 for one cell setup
- Set register 0x04 = 4200mV
- Set register 0x06 = 5000mV
- Set register 0x08 = 3200mA
- Jumper EN_OTG to 3.3V
- Set register 0x34 (Charge Option 3) bit EN_OTG = 1
NO BOOST OUTPUT