Hello-
We have copied our battery pack design from sheet 19 of the BQ20Z65 data sheet. The data sheet says that at least 1uA is needed into the PACK pin to wake the device up from shutdown. We wish to use the lowest possible current/voltage to do this, for safety reasons.
What is the maximum current this crcuit will take into the PACK+ connector, at a Vstartup of 5.5V, in order to be assured the device will wake up? Note that the PACK+ terminal connects to ressitors, FETs, and other pins of the BQ20Z65, complicating the analysis. Thanks in advance for your help, and Best Regards,
-Tim Starr on behalf of MF@HW
