Bq34z100 Design Energy Scaling

Hi again...

I have a 12V, 6s, PBA battery pack.

The nominal cell V is 2.1 V

The Design capacity is 18000 mAh

The Design Energy is then 18000 x 2.1 = 37800, so I will use a design energy scale of 10.

Questions:

So now the Design Energy value should be  3780, correct?

Should the Design Capacity now be input as 1800 or 18000 ?

Are any other parameters changed due to the Design Energy Scale (not to be confused with data scaling which is 1 for my application)?