Chemistry ID calculator error for FDK Ni-MH cells

Hi, I submitted the data from the charge/discharge cycle to get a new Chemistry ID as instructed in the SLVA725 instruction manual, but it appears that I am getting an error and a couple warnings from the data submitted.

Here is the resulting report: (Please visit the site to view this file)

The cell pack in question was charged and discharged on a MACCOR while the current, voltage, and temp was logged using the bqStudio via the BQ34Z100PWR-G1 BMU.

The Ni-MH cells were charged and discharged as per the manufacturer’s recommendations.

Please advise as to how I should proceed to get a chemistry ID for the cells that we would like to use in our solution.

The Ni-MH cells we are using are the FDK Twicell HR-43FAUP (datasheet here) in a 12S3P configuration. The pack was charged at 1.35A and discharged at 2.7A down to 10.8V.

 Let me know if there is any other information that may be useful.

Thanks,

Dariusz