Part Number: TPS54334
Hello, I have a question regarding the simplified schematic used in the datasheet of the TPS54334.
In the schematic a resistor divider (where R1 = 221 kOhm and R2 = 84.5 kOhm) is connected to the EN pin with a Vin of 4.2 V to 24 V. However, with a Vin of 24 V, this should result in a voltage at the EN pin of around 6.6V. This is higher than the absolute maximum rated voltage of 6V that is mentioned in the datasheet. Is this possibly a mistake in the datasheet or is this because of some other reason?
Thank you.