Please help. Some questions about I2C Write with bq34z110

Hi,

I use STM32F215XX chip communicate with Bq34z110 chip through i2c.

I use two tools.

-> [ 1 ] 'bq Evaluation Software'

-> [ 2 ] 'IAR Embedded Workbench'

 I follow ,here is the step.

but, I have a problem in ' step ( B ) '

[ 1 ] Use the 'bq Evaluation Software'

[ 2 ] Use the 'IAR Embedded Workbench'

- front

- back

All '4C 00' appeared.

I think two in the case of problems.

< 1 >

I played a lot of thought.

In addition to a differnt matter.

Differnt Command!!

Seems there is an issue that looks because of differences in other parts(=command).

Can you see me the'bq Evaluation Software - DataRAM' and'bq Evaluation Software - DataFlash'  monitor using for capture?

< 2 > 

The 'Ack' signal's too weak.

That 'Ack'( = [ 2 ] Use the 'IAR Embedded Workbench' -front ) as possible?

I don't know.

Regards and Thanks,

user4519591.