Hi,
I use STM32F215XX chip communicate with Bq34z110 chip through i2c.
I use two tools.
-> [ 1 ] 'bq Evaluation Software'
-> [ 2 ] 'IAR Embedded Workbench'
I follow ,here is the step.
but, I have a problem in ' step ( B ) '
That both tools yielded the same checksum.
But it is incorrect.
Both have '4C 00' printed.
Seems there is an issue that looks because of differences in other parts(=command).
Flags, Control Status Etc..
Can you see me the'bq Evaluation Software - DataRAM' and'bq Evaluation Software - DataFlash' monitor using for capture?
Regards and Thanks,
user4519591.