Part Number: TPS61175
I have revived question from customer.
In the data sheet, the ripple voltage is specified by the output capacitor of TPS61175.
However, it seems that the calculation formula and the measured waveform are different.
When Vin 5.5V, Vout 13.0V, Iout 1A, SW 1.2MHz, Cout 47uF
In the calculation formula, the ripple voltage is about 10mV.
If you add the ESR component, it will be 15mV.
Please tell us about the difference between this calculation formula and measured value.
Best regards,
Katsuragawa
御社のデータシートから、
TPS61175の出力コンデンサによりリップル電圧が規定されておりますが、
計算式と実測の波形が異なっているように考えられます。
Vin 5.5V,Vout 13.0V,Iout 1A,SW 1.2MHz,Cout 47uFのとき、
計算式ではリップル電圧は約10mVとなりました。
それにESR分を加味すると15mVとなります。
こちらの計算式と実測との差分についてご教示ください。