Hello,
I work with the bq33100 EVM. I connected 5 caps (everyone with 25F, 42mOhm,2.7V) to the board. The value of capacitance I expected was 5F, but the measurement from the board is 52F when I started a learn cycle with command 23. So the result is ten times larger than 5F. What could be the reason for this fault?
The ESR measurement is better. 5*42mOhm=210mOhm. The board gives 270mOhm.
In result the health measurement couldn´t be right when Capicitance measurement is wrong.
Could someone help?
