BQ27510-G3 - Golden image format

Hi all,

In one of our designs, we are using the fuel gauge BQ27510-G3.

We have successfully completed the optimization cycle of this fuel gauge using BqStudio software and generated the golden image in .srec format.
We needed the golden image  in .dfi format and since BqStudio doesn't support .dfi format, we used BqEasy software to generate the golden image in .dfi format.

The procedure we followed was :

1. Performed optimization cycle for BQ27510-G3 using BqStudio.
2. Generated .gg file and .srec file
3. Flashed .gg file to the fuel gauge
4. Connected the fuel gauge to BqEasy software. Selected Step 5B in software and clicked "UPDATE GOLDEN PACK" and generated the .dfi file.

During the 4th step, generation of .dfi file, we found one error. Please find below the snapshot of the error.

Even after this error, we clicked OK and proceeded further. And finally, we got one file in .dfi format (size approx 2KB).

We wanted to know that whether the generated file is correct or not, since there was an error before generating the file ?
Also, what does this error signifies ?
Is there anything to be worried ?

Also, please find the .srec file and .dfi file attached for your reference. 
NOTE : Both the files has been saved as .txt just for uploading purpose.

/cfs-file/__key/communityserver-discussions-components-files/180/_5F00_0510_5F00_0400_5F00_GOLDEN_5F00_dfi.txt

/cfs-file/__key/communityserver-discussions-components-files/180/0510_5F00_4_5F00_00_2D00_bq27510G3_5F00_srec.txt

Please suggest.

Thanks 
Harsha