Hello there,
I have a problem with the temperature calibration of the BQ40z50-R1
“Calibration – Calculated external sensor two temperature correction is out of range” ( Sometimes the error also shows as sensor one)
We use only one temperature sensor on TS1. The other TS1 inputs are disabled and to GND.
Has anyone got an idea of what could be wrong here?
In my application I have the following parameters:
* Battery voltage (VBAT) -> typ. 14,6 V, max. 16,8V
* Input current (IIN) and voltage (VBUS) -> VBUS = 3V3
* System voltage (VSYS) and current (ISYS) -> IDSG = 2750mA
* Charge current (ICHG) -> 1375 mA
* Registers setup (I can share the relevant parts if it is required)
