Bq34z110 learning(Optimization) cycle

I have some questions before learning(Optimization) cycle.

Our Application: 4 Batteries(12V 155Ah,US 12VXC) in series =>48V

Charge Current :20.8A

Discharge Current : 0C~3C(0A~465A)

I follow SLUSB55B P.29, Step 5

Load Select:1

Load Select:0

Cell Terminate Voltage: 10200mV ( Maximum:5000mV) ,How to do?

Quit Current : ? , suggest number?

Qmax Cell 0: 155000/10=>15500 , Because Calibrate Current use 1/10 real current

So, Before learning cycle only 5 parameters to Set just OK?