My computer is running Windows XP and is 32 bit. I am running the lastest BQ EVSW from the installer on the TI website. I also installed the EV 2400 support components after the installer finished. The EV2400 appears to be connecting and communicating somewhat with the EVSW, but I am not getting full functionality. The chip I select from the menu is bq27541HDQ v2.00. When it proceeds I get the following error message:
"The detected device is not compatible with this application! Proceed at your own risk."
Despite the error I go to DataRAM and click refresh, and everything seems to be talking.
When I go to DataFlash, I get another error message: "The DataFlash configuration file target does not match the detected target!" I click ok and proceed at my own risk. Now, when I attempt to "Read All" I get the error:
"6/27/2012 3:52:50 PM : Error reading Data Flash Subclass Data, Code = 6"
and nothing is read in. I've scoured the TI website and forums looking for answers, but found nothing that could resolve my problem. I did find one post that mentioned error code 6 but the issue was never resolved, and it involved Windows 7 64 bit which is not the same case for me. Most posts I found when I could find any to do with the EV 2400 mentioned I needed to install the support components, but I've done it and installed and reinstalled and it still does not work.