The design I'm working on uses a 2 mOhm Rsense with the bq40z60. What is the equation for adjusting CC deadband (coulomb counter)?
The default CC deadband is a value of 9. The TRM (August 2015) says nothing about how this register is used or what should be done when running a different Rsense from the EVM or default setting.
Is a CC deadband of 9 * 116 NV = 1 uV the proper setting for a 5 mOhm Rsense?
If so what do I set CC deadband too for a 2 mOhm Rsense?
My concern centers around the QMax update Offset Error and QMax time-out.