Using BQ78350 and BQ76930 combination for BMS. Temperature reading ok and Discharge FET turns off (during OT in discharge).
The OTC flag does not come on during charge and verified the following :
1. FET options OTFET is enabled
2. Enabled Protection A - 0xFF
3. Enabled protection B - 0x0F
4. Enabled Protection C - 0x15
5. Permanent Fail A - 0x10
6. Permanent Fail B - 0x30
The Charge FET does not Turn OFF during Over temperature. Also verified charge current is present.
Any other settings i am missing?