Quantcast
Channel: Power management forum - Recent Threads
Browsing all 35901 articles
Browse latest View live

Image may be NSFW.
Clik here to view.

BQ27542-G1: STATIC_CHEM_CHKSUM / ALL_DF_CHKSUM / STATIC_DF_CHKSUM for BQ27542-G1

Part Number:BQ27542-G1Hello,Sir,There is something confused me,As the picture below,1,what‘s the functions about those CHECKSUM:STATIC_CHEM_CHKSUM  / ALL_DF_CHKSUM  / STATIC_DF_CHKSUM .2,what data  was...

View Article


TPS562231: Isolated DCDC

Part Number:TPS562231Dear Team,What is the suitable solution for 12Vin to 3.3V/2A with isolation?Only flyback can provide the isolation here? Or we have easier solution here?BrKevin

View Article


Image may be NSFW.
Clik here to view.

LM25141-Q1: How to set FMOD? and, RC network

Part Number:LM25141-Q1Dear,The customer has two questions:1, when set FMOD, what rules can I refer to?    ±5%, Does it means Nominal Frequency, or , Voltage Value of DITH Pin?    the modulation rate...

View Article

LED driver

Hi,I am looking for a LED driver to driver BL (3-4 LED in parallel). I have the BL with working voltage of is 3.2V and current drawn from the BL is 30mA. The BL driver should have PWM interface to...

View Article

BQ33100: 0031

Part Number:BQ33100Hi, I am trying to manage 4 capacitors with a bq33100. Nothing charges when I put power on, even if I'm using the circuit page 54 of the datasheet (not the same charger though)...

View Article


Image may be NSFW.
Clik here to view.

TPS3813: TPS3813K33DBVR

Part Number:TPS3813Hello,I am Akshay Pathak working as an Embedded Hardware Engineer in Teksun Microsys Pvt. Ltd. I am using Watchdog Timer IC part no. TPS3813K33DBVR in one of my application and I...

View Article

LM3481: Compensation

Part Number:LM3481Hi:The product I designed USES LM3481,COMP Pin as Compensation Pin,Rc= 22.6k, which is not normal resistance. How is the resistance value set?Is there a formula?thank you.BRSunny

View Article

BQ27010: order information

Part Number:BQ27010Hi Team,i have customer is the old design and continue to order, but the customer is ordering BQ27010DRKRG4,we want to know BQ27010DRKRG4 and BQ27010DRKR is the same?

View Article


TPS43060: FET matching to TSP43060 DRIVERS for HIGH POWER boost converters....

Part Number:TPS43060Dear Forum, I'm trying to create a synchronous boost converter using the TPS43060 chip.Here is my issue.  I have run through Web Bench and (to my surprise after many foiled attempts...

View Article


TPS7A91: Inrush current

Part Number:TPS7A91Hi ,I am planning to use TPS7a91 in our design. TPS7a91 is used in the design to power the FPGA rail.There are 1000uf decaps in the core rail which appears at the output of LDO...

View Article

Image may be NSFW.
Clik here to view.

SMPS input capacitor and pi filter selection values

Hi There,I have designed power supply based on Ucc28064 and Ucc256301 ic based in TIDA-010015 model. It is 600W power supply and need some input on choosing these filter components. But i want to get...

View Article

BQ27220: Support -20 degree?

Part Number:BQ27220Hi Expert,Does bq27220 CEDV support -20 degree?If customer cut off voltage Spec is 3.4V, when I am doing the data log testing, should I follow it? Or 3.0V is better? Thanks!

View Article

TPS7A4501-SP: Junction Temperature Absolute Maximum Rating

Part Number:TPS7A4501-SPIn datasheet SLVSC31D (Revision Aug-2015) in §7.1 the Abs Max Junction Temperature is spec'd as 150°C. In §11.3, it says 125°C, and so does MILSMD5962-12224, Rev.D.Now, 125°C is...

View Article


TPS544C20: is there any leakage current if VIN and ADD do not apply?

Part Number:TPS544C20Hello experts,I have a question. Is there any leakage current (internal leakage current path) at a following pins if VIN and VDD do not apply and applied a voltage (less than ABS)...

View Article

Image may be NSFW.
Clik here to view.

LM3481: lm3481

Part Number:LM3481HI,I am using LM3481 in a design,where input is 6-11V, and output is 13.5V,but i am facing a issue when i testing it .short circuit protection is not working .when short circuit occur...

View Article


BQ77915: bq77915

Part Number:BQ77915Hii SirWe are intending to use the bq77915 IC for cell balancing in the battery pack.as mentioned in the datasheet of the bq77915 in the detailed design application page. for 18V...

View Article

TPS92515HV: PWM frequency and UVLO

Part Number:TPS92515HVHello,we're experimenting an issue with 10KHz PWM signal: if it goes to 0% we are not able to get a good output switching signal any more.The datasheet says...

View Article


BQ4050: Charging

Part Number:BQ4050Hi,I plan to use bq4050 with the charger bq24105.In the technical reference - SLUUAQ3, in the section 4.4 (page 30), the charging current can be configured.So i dont understand, the...

View Article

BQ78350-R1: Need of EV2400 for TIDA-00792 , required or not? Can TIDA-00792...

Part Number:BQ78350-R178350 is having capability to drive bq76940 chip using i2c bus? How about balancing algorithm, is it in built in 78350 and how about protections?

View Article

Image may be NSFW.
Clik here to view.

TPS62163: The initial accuracy of TPS62163

Part Number:TPS62163Hi team,I see there is a Initial output voltage accuracy data in the datasheet. I'm not very sure what the data mean here. Is it the accuracy of the internal reference voltage?

View Article
Browsing all 35901 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>